Redarc 12A 3-Stage Trailer Battery Charger • BCDC1212T

Product Details

Connecting directly to the trailer plug, the BCDC1212T provides 3-stage battery charging for optimum battery charge, protecting the truck’s start battery from discharge while charging the auxiliary battery responsible for operating winches, hydraulic pumps, dump trailers, liftgates and boat trailers.

EASILY INSTALLED IN THE TRAILER’S NOSE CONE
The BCDC1212T ensures little to no mains charging is required for your trailer battery, meaning you can charge the trailer battery while you drive and reduce the need to plug into the socket to top-up battery charge. The BCDC1212T comes pre-wired with wiring harness allowing easy installation into any typical trailer battery setup, or other trailers where the secondary battery’s charging current is drawn from the 12V Auxiliary Power available on a pre-installed, suitably rated, trailer plug and towing harness.
QUALITY FUSE KITS FOR OPTIMUM PERFORMANCE
REDARC offers a high quality 23amp fuse kit for input and 30amp fuse kit for the BCDC1212T output to ensure safe and efficient operation.

Specs:

  • BATTERY CHEMISTRY:Standard Lead Acid, Calcium content, Gel, AGM or LiFePO4 type only
  • CONTINUOUS RATING:12A
  • POWER TYPE: – AC DC DC TO DC
  • NOMINAL OUTPUT POWER: 147W (12V vehicle) / 294W (24V vehicle)
  • INPUT FUSE RATING: 15A to 23A (Not supplied)
  • SUITABLE FOR 12V SYSTEMS: Yes
  • SUITABLE FOR 24V SYSTEMS: Yes
  • CABIN/ CANOPY INSTALL: Yes
  • NO LOAD CURRENT: <100mA
  • TRAILER INSTALL: Yes
  • ENGINE BAY INSTALL: Yes
  • MAX. CHARGING VOLTAGE: 15.3V
  • OUTPUT FUSE RATING: 30A (Not supplied)
  • OPERATING TEMPERATURE: -15°C to 80°C
  • MAX. RATED OUTPUT CURRENT: 11A (12V vehicle) / 20A (24V vehicle)
  • INPUT VOLTAGE: 9 – 32V
  • STANDBY CURRENT: <8mA
  • CONNECTOR TYPE: Bare wire

$299.99

Out of stock